Guangzhou Koma Electronic Technology Co., Ltd.
Guangzhou Koma Electronic Technology Co., Ltd.
Add to Cart
2024 Professional Fractional Co2 Laser Stretch Marks Machine Co2 Fractional Laser Dot Matrix Removal Acne Scars
Product parameter
| Working Mode | Single pulse, continuous pulse, repeated pulse, super pulse |
| Output Power | 1-60W(adjustable) |
| Input Power | 450VA |
| Laser Type | Sealed-off CO2 laser |
| Laser Wavelength | 10.6um |
| Divergence angle | 4 mrad |
| Focused Spot Diameter | ≤0.4mm |
| Tool bit focus | F=100mm(optional) |
| Pulse width | 0.1ms-10ms |
| Aiming beam | Red diode laser(650nm, 2mW) |
| Transmission system | Spring-balanced 6joint arms |
| Cooling system | Inside-circle coolant |
| Display screen | 12.1 inch touch screen |
| Working environment temperature | 5-40℃ |
| Air pressure/Humidity | 86Kpa-106 Kpa/<80% |
| Preheating-time | >5min |
| Electromagnet | No electromagnet interrupt |
| Other working environment | No obvious shaking or airflow |
| N.W./G.W. | 39kgs/56kgs |
| Size | 116cm×58cm×47cm; 75cm×31cm×14cm(Laser Arm) |
Application
1,Removal of acne, acne pits and acne marks
2,Treating old and new scars
3, treatment, Tightening, Whitening
4,Treatment of pigmented lesions such as freckles and ostrum miracles
5,Anti aging, firm skin; Remove fine lines from the eyes and crow's feet
6,Eliminating pregnancy induced wrinkles
Working Theory
The wavelength of CO2 laser is 10.6um, which can be fully absorbed by human biology tissue (all the skin are available). The sealed-off fractional CO2 laser, whose output laser-light will be transferred by articulated arm, which has better sense of direction and higher energy density.
The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue.
With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.
Feature
1.Remove acne and acne marks;
2.Eliminate dry pattern, fishtail, etc around the eyes;
3.anti-aging: skin firming, wrinkle removal,improve the skin condition;
4.Treatment of pigmentary lesions such as freckles and ostrum miracles;
5.Scar: treatment of depressed, old dispersion, convex vascular/fibrous scar;
6.Stretch marks
7. tightening, whitening, increasing moisture and softness
8.fractional mode and normal mode to choose from
Normal mode
a,Tighten —— Fast tightening, lasting constriction to improve by 60%.
b,Clean the —— Deep anti-aging, level to improve by 80%.
c,Moist —— Improving secretion, moisture level to improve by 80%.
d,Pink —— Vulva rejuvenation, lightened pigment, and pinks labia parts, the delicate degree to improve by 70%.
9.Laser wavelength10.6um, Red diode laser(650nm, 2mW)
10.Transmission system: Spring-balanced 6 joint arms